RF Monitor software

Ways to display measurements in RF Monitor

The RF Monitor software displays the measurements transmitted by loggers available in the network. Several views are available. List of loggers and tabs The list of products is displayed at the top with the...

Read Article

Does the software allow to quickly view which logger is in alarm? (integration of a map)

Yes, the software allows you to embed a map, photograph and to position your loggers above. It is then possible to view measurements and alarms in this screen, up to two alarms per product (the first two sensor...

Read Article

Setting of the operating radio channel

Open the configuration window. Click on the icon Configuration on the line of the selected device Select the tab RF Settings When starting, the operating channel of a logger is channel 1. You may modi...

Read Article

Channel securization

In order to access this option you may need to upgrade RFMonitor. The latest version is available on our website (RF Monitor update). Please check that the firmware of your RF-to-USB key is equal to or greater...

Read Article

Alerts settings - E-mail setting

Setting of the alerts types Select menu Settings / Options. Click on Alerts Select Enable alerts Select the needed alerts in the corresponding column. The alerts concern measures under or ...

Read Article

Full memory download

If for any reason data are missing into the data base, you can fully download the memory of your logger. The 32000 data stored in to the memory of your logger will be sent to RF Monitor to fill the database. ...

Read Article

Display humidity in % from a 4-20 mA sensor

This article explains how to change the display of measurements using the formula editing. In this case, it is to show the relative humidity with a 4-20 mA sensor connected to a LGS34. The philosophy is the sam...

Read Article

Logger calibration

Access the window Formulas edition and calibration Click on Settings/Options Click on Modules. Select Enable devices formulas edition and Enable advanced tools (calibration tools…). Click on Save. Display...

Read Article

RF‐to‐USB KEY driver stable version installation

It may happen that Windows automatically update the driver of the RF-to-USB key with a version that does not work. It is then necessary to manually reinstall the correct driver. Process Close RF Monitor...

Read Article

Upgrade of the Logger firmware

Click on the icon Tools/ Configuration on the line of the product you want to upgrade (or right click on the line of the logger). Click on Firmware Click on the icon file The firmware which corresponds t...

Read Article